Automatic Telescopic Sliding Doors

The Automatic Telescopic Sliding Door is ideal for medium to high volume pedestrian access in many commercial environments where a sliding door is required but space is at a premium.

This Door configuration consists of Two Door Leaves Sliding in the Same Direction, one in front of the other.

The Basic Doorset comprises of a Door Leaf and Frame and can be supplied in either Single Parting or Double Leaf Bi-parting. The Doors are commonly mounted on the inside of the building and slide in front of a Side wall or a Side screen.

Our Door can be supplied to replace old or Damaged Manual Doors, or as a Complete Entrance System with the option of Fixed Side Screens and Transom Panels.

The Door leaf and Frame are constructed from an Aluminium Profile with internal bracing to form a doorset with inbuilt strength or Frame less 12mm Clear Toughened Glass.

The Doorset's can be produced in a wide range of colours by Polyester Powder Coating the Frame to any RAL colour. Alternatively the door can be provided with a Silver or Bronze Anodised Finish or even stainless steel.

The Automatic Door Telescopic Sliding Operator which powers the door is contained within an overhead header unit. This unit contains the Track, Motor and Microprocessor Controller complete with Multi-position Control Switch to set the Modes of Operation.

The most common in the range of door activation options is by Overhead Sensors on both sides of the opening.

Standard Safety Features of our Automatic Telescopic Sliding Door include Safety Beams, which will Hold Open the Door if the Beam is Broken, Automatic Reverse on Obstruction and Battery Back-up to provide for Emergency open in the Event of Power Failure.

Security is provided by a Deadlock and, to protect against Weather Conditions, the door is fitted with Brush Seals and an Aluminium Threshold. The specification of your door can be changed as per site requirement or on especial request.