Automatic Swing Doors

The Automatic Swing Door is ideal for medium to high volume pedestrian access in many commercial environments where a sliding door is not practical and space is at a premium.

The basic doorset comprises of a Door Leaf and Frame and can be supplied in either Single or Double Leaf. The doors can be fitted to Hinge either Inwards or Outwards according to your requirements and the constraints of the Surrounding Environment.

Our Doors can be supplied to replace old or Damaged Manual Doors, or as a Complete Entrance System with the option of Fixed Side Screens and Transom Panels.

The Door leaf and Frame are constructed from an Aluminium Profile with internal bracing to form a doorset with inbuilt strength or Frame less 12mm Clear Toughened Glass.

The Doorset's can be produced in a wide range of colours by Polyester Powder Coating the Frame to any RAL colour. Alternatively the door can be provided with a Silver or Bronze Anodised Finish or even Stainless Steel or Fully Frame less Toughened Glass Door.

The Automatic Swing Door operator which powers the door is contained within an overhead header unit. This unit contains the Motor and Microprocessor Controller complete with Multi-position Control Switch to set the Modes of Operation.

The most common in the range of door activation options is by Overhead Sensors on both sides of the opening.

Standard Safety Features of the Automatic Swing Door include Presence Safety Sensors mounted on the front and back edges of the door leaf.

Security is provided by a Deadlock and, to protect against Weather Conditions, the door is fitted with Brush Seals and an Aluminium Threshold.

The specification of your door can be changed as per site requirement or on especial request.