The most popular and cost effective Automatic Entrance Door is the Automatic Sliding Door and it is ideal for medium to high volume pedestrian access in many commercial environments and DDA.

The basic doorset comprises of a door leaf and frame and can be supplied in either Single Parting or Double Leaf Bi-parting. The doors are commonly mounted on the inside of the building and slide in front of a side wall or a Side-screen

Our Door can be supplied to replace old or damaged manual doors, or as a complete Automatic Entrance System with the option of fixed Side Screens and Transom Panels.

The door leaf and frame are constructed from an aluminium profile and Glazing with Clear Laminated Safety Glass.

The doorset's can be produced in a wide range of colours by Polyester Powder Coating the frame to any RAL colour. Alternatively the door can be provided with a Silver or Bronze Anodised finish or Stainless Steel even Frame less 12mm Toughened Glass.

The Automatic Sliding Door Operator which powers the door is contained within an overhead header unit. This unit contains the Track, Built-in-Lock Brush less Motor, and Microprocessor Controller complete with Multi-position Control Switch to set the Modes of Operation.

The most common in the range of door activation options is by Overhead Sensors on both sides of the opening.

Standard safety features of our Automatic Sliding Door include Safety Beam Sensor, which will Hold Open the door if the Beam is broken, Automatic Reverse on Obstruction and Battery Back-up to provide for Emergency Open in the event of Power Failure.

Security is provided by a Deadlock on Door Leaf and an Electronic Lock, to protect against Weather Conditions, the door is fitted with Brush Seals and an Aluminium Threshold.

The specification of your door can be changed as per site requirement or on especial request.